Table of ContentsView in Frames

Procedure - Removing drives from a 60-drive tray

If you need to move or ship a 60-drive controller-drive tray or a 60-drive expansion tray, you must remove all drives from all drawers.

Step

  1. Perform the following steps to remove all of the drives from the drive drawer:
    1. Raise the drive handle to vertical.
    2. Use the handle to lift the drive from the drive drawer.
    3. Place the drive in static-free packaging and away from magnetic devices.
      Attention: Possible loss of data access – Magnetic fields can destroy all the data on the drive and cause irreparable damage to the drive circuitry. To avoid loss of data access and damage to the drives, always keep drives away from magnetic devices.