When you install StorageGRID, you must be aware of specific safety warnings that apply to the task. For additional warnings, see the printed Safety Notices document.
![]() |
Warning: Risk of electrical shock - Before removing or installing a power supply, turn off the power switch and unplug the power cord.
|
![]() |
Warning: Risk of bodily injury - Each tray has more than one power cord. To remove all electrical current from the devices, make sure that all of the power cords are disconnected from the power source.
|
![]() |
Warning: Risk of bodily injury - Do not use equipment in the cabinet as a shelf or work space.
|
![]() |
Warning: Risk of exposure to laser radiation - Do not disassemble or remove any part of an SFP transceiver because you might be exposed to laser radiation.
|
The following warning applies to the SG5612 only.
![]() |
Warning: Risk of bodily injury - Two people or a mechanical lift are required to lift the component safely.
|
The following warnings apply to the SG5660 only.
![]() |
Warning: Risk of bodily injury - Four people or a mechanical lift are required to lift the component safely.
|
![]() |
Attention: Risk of equipment damage – If you want to move the SG5660 to a new location, you must remove all of the drives from the enclosure. Never move or ship the SG5660 with drives installed.
|
For additional warnings, refer to the printed Safety Notices document.