Table of ContentsView in Frames

Re-creating a mirrored aggregate after a plex failure

In case of a failure that causes a plex to fail, you can remove the plex from the mirrored aggregate, fix the problem, and then re-create it. You can also re-create the mirrored aggregate using a different set of disks or array LUNs, if the problem cannot be fixed.

Steps

  1. Destroy the failed plex by using the storage aggregate plex delete command.
    Example
    The following command destroys plex0 from the mirrored aggregate: cluster1::> storage aggregate plex delete -aggregate aggr1 -plex plex0
  2. Convert the aggregate to a mirrored aggregate by using the storage aggregate mirror command.
    Example
    The following command selects the disks and adds a plex to create mirrored aggregate aggr1: cluster1::> storage aggregate mirror -aggregate aggr1