Table of ContentsView in Frames

Adding alerts

You can configure alerts to notify you when a particular event is generated. You can configure alerts for a single resource, for a group of resources, or for events of a particular severity type. You can specify the frequency with which you want to be notified and associate a script to the alert.

Before you begin

About this task

You can create an alert directly from the Event details page after receiving an event in addition to creating an alert from the Configuration/Alerting page, as described here.


  1. In the left navigation pane, click Configuration > Alerting.
  2. In the Configuration/Alerting page, click Add.
  3. In the Add Alert dialog box, click Name, and enter a name and description for the alert.
  4. Click Resources, and select the resources to be included in or excluded from the alert.
    You can set a filter by specifying a text string in the Name contains field to select a group of resources. Based on the text string that you specify, the list of available resources displays only those resources that match the filter rule. The text string that you specify is case-sensitive.

    If a resource conforms to both the include and exclude rules that you have specified, the exclude rule takes precedence over the include rule, and the alert is not generated for events related to the excluded resource.

  5. Click Events, and select the events based on the event name or event severity type for which you want to trigger an alert.
    Tip: To select more than one event, press the Ctrl key while you make your selections.
  6. Click Actions, and select the users that you want to notify, choose the notification frequency, choose whether an SNMP trap will be sent to the trap receiver, and assign a script to be executed when an alert is generated.
    Note: If you modify the email address that is specified for the user and reopen the alert for editing, the Name field appears blank because the modified email address is no longer mapped to the user that was previously selected. Also, if you modified the email address of the selected user from the Management/Users page, the modified email address is not updated for the selected user.
    You can also choose to notify users through SNMP traps.
  7. Click Save.

Example of adding an alert

This example shows how to create an alert that meets the following requirements:

Perform the following steps in the Add Alert dialog box:

  1. Click Name, and enter HealthTest in the Alert Name field.
  2. Click Resources, and in the Include tab, select Volumes from the drop-down list.
    1. Enter abc in the Name contains field to display the volumes whose name contains "abc".
    2. Select <<All Volumes whose name contains 'abc'>> from the Available Resources area, and move it to the Selected Resources area.
    3. Click Exclude, and enter xyz in the Name contains field, and then click Add.
  3. Click Events, and select Critical from the Event Severity field.
  4. Select All Critical Events from the Matching Events area, and move it to the Selected Events area.
  5. Click Actions, and enter in the Alert these users field.
  6. Select Remind every 15 minutes to notify the user every 15 minutes.

    You can configure an alert to repeatedly send notifications to the recipients for a specified time. You should determine the time from which the event notification is active for the alert.

  7. In the Select Script to Execute menu, select Test script .
  8. Click Save.