Table of ContentsLibraryView in Frames

Viewing vif status

You can view the current status of a specified vif or all single-mode and multimode vifs on your storage system.

Step

  1. Enter the following command: vif status [vif_name]

    vif_name is the name of the vif whose status you want to display.

    If you do not specify the vif name, the status of all vifs is displayed.

Example

The following example displays the status of the vif vif1:
vif status
default: transmit 'IP Load balancing', VIF Type 'multi_mode', fail 'log'
vif1: 2 links, transmit 'IP+port Load balancing', VIF Type 'multi_mode' fail 'default'
         VIF Status     Up      Addr_set
        up:
        e0b: state up, since 30Jan2009 14:23:24 (00:04:40)
                mediatype: auto-1000t-fd-up
                flags: enabled
                input packets 324193, input bytes 468036576
                output packets 161472, output bytes 13983580
                up indications 2, broken indications 0
                drops (if) 0, drops (link) 0
                strike count: 0 of 10
                indication: up at 30Jan2009 14:23:24
                        consecutive 604, transitions 5
        e0c: state up, since 30Jan2009 14:23:24 (00:04:40)
                mediatype: auto-1000t-fd-up
                flags: enabled
                input packets 526276, input bytes 762227558
                output packets 262355, output bytes 22321102
                up indications 2, broken indications 0
                drops (if) 0, drops (link) 0
                strike count: 0 of 10
                indication: up at 30Jan2009 14:23:24
                        consecutive 606, transitions 5