Table of ContentsView in Frames

Assigning an interface to an IPspace

To assign an interface to an IPspace, you must ensure that the interface does not have a configured IP address. You can assign only one interface at a time. If IPv6 is enabled on your storage system and you bring up an interface, an IPv6 address is automatically configured on the interface.

About this task

Note: You cannot assign the e0M interface to a nondefault IPspace.

Step

  1. To assign an interface to an IPspace, enter the following command:
    ipspace assign ipspacename interface_name

    ipspacename is the IPspace name to which the interface is assigned.

    interface_name is the name of the interface to be assigned.