Table of ContentsView in Frames

Destroying IP-based target portal groups

If necessary, you can destroy IP-based target portal groups.

Before you begin

No active sessions must be in progress.


  1. Enter the following command:
    vfiler run vFiler unit iscsi ip_tpgroup destroy [-f] tpgroup_name

    -f forces the group to be destroyed, even if that terminates an existing session using one of the IP addresses in the group.

    tpgroup_name is the target portal group name.

    The target portal group is destroyed, and if there are active iSCSI sessions, a warning message indicates that those connections are lost.


vfiler run vfiler2 iscsi ip_tpgroup destroy vfiler2_tpg1