Table of ContentsView in Frames

Removing resources from a vFiler unit

You can remove resources you have added to the vFiler unit. For example, you might have to remove resources when an SSP wants to reduce the amount of storage used, to reduce operating costs.

Before you begin


  1. To remove the resources from a vFiler unit, enter the following command:
    vfiler remove vfiler_name [ -f ] [ -i ip_address [ -i ip_address ] ...] [ path [ path ... ] ]

    You can use the -f option to skip warning messages.


    The following command removes an IP address and a volume from an existing vFiler unit:

    vfiler remove vfiler1 -i /vol/vol3