Table of ContentsView in Frames

Enabling or disabling SNMP traps for Data ONTAP and the SP

You can use the snmp.enable option to enable or disable SNMP traps for both Data ONTAP and the SP.

About this task

The snmp.enable option is the master control for SNMP traps for both Data ONTAP and the SP. Consider leaving the snmp.enable option to on to enable SNMP traps for both Data ONTAP and the SP.

Step

  1. To enable or disable SNMP traps for both Data ONTAP and the SP, enter the following command at the storage system prompt:
    options snmp.enable [on|off]

    The default is on.