Table of ContentsView in Frames

Configuring the cluster service to start manually

In order to recover a cluster from shared LUNs on a SnapMirror destination, you must first configure the cluster service to start manually.

Steps

  1. Configure the cluster service to start manually on all nodes of the cluster by performing the following actions on each node of the cluster:
    1. In the left MMC pane, expand the Services and Applications option, if it is not expanded already.
    2. Click Services.
    3. Double-click Cluster Service.
    4. Select Manual from the Startup Type list.
  2. Reboot all nodes of the cluster.

    Note: The reboot is required so the existing LUNs fail to mount and, therefore, the drive letters that were in use will be released.