Table of ContentsView in Frames

How 7-Mode options map to clustered Data ONTAP commands

In Data ONTAP operating in 7-Mode, you execute the options command to set configurable storage system software options. In clustered Data ONTAP, you use command parameters to set these options. The tables below show how 7-Mode commands map to clustered Data ONTAP commands.

In the "7-Mode command" column, the base options command is not shown for the sake of clarity. Where you see:

acp.domain

the actual long form of the command would be:

options acp.domain

For information about how the tables in this chapter are organized, see Understanding the 7-Mode to clustered Data ONTAP command mapping.

Navigation table

  • G
  • (no entries)
  • J
  • (no entries)
  • K
  • (no entries)
  • M
  • (no entries)
  • O
  • (no entries)
  • P
  • (no entries)
  • Q
  • (no entries)
  • U
  • (no entries)
  • V
  • (no entries)
  • X
  • (no entries)
  • Y
  • (no entries)
  • Z
  • (no entries)

A

7-Mode option Clustered Data ONTAP command
acp.domain options acp.domain (from nodeshell)

system node run -node {nodename|local} options acp.domain

acp.enabled options acp.enabled (from nodeshell)

system node run -node {nodename|local} options acp.enabled

acp.netmask options acp.netmask (from nodeshell)

system node run -node {nodename|local} options acp.netmask

acp.port options acp.port (from nodeshell)

system node run -node {nodename|local} options acp.port

auditlog.enable security audit
auditlog.readonly_api.enable security audit
autologout.console.enable timeout modify -timeout

system timeout modify -timeout

autologout.console.timeout timeout modify -timeout

system timeout modify -timeout

autosupport.content autosupport modify -remove -private -data

system autosupport modify -remove -private -data

autosupport.doit options autosupport.doit
autosupport.enable autosupport modify -enable

system node autosupport modify -enable

autosupport.from autosupport modify -from

system node autosupport modify -from

autosupport.local_collection autosupport modify -local-collection

system node autosupport modify -local-collection

autosupport.mailhost autosupport modify -mailhost

system node autosupport modify -mailhost

autosupport.max_http_size autosupport modify -max-http-size

system node autosupport modify -max-http-size

autosupport.max_smtp_size autosupport modify -max-smtp-size

system node autosupport modify -max-smtp-size

autosupport.minimal.subject.id autosupport modify -hostname-subj

system node autosupport modify -hostname-subj

autosupport.nht_data.enable

autosupport modify -nht

system node autosupport modify -nht

autosupport.noteto autosupport modify -noteto

system node autosupport modify -noteto

autosupport.partner.to autosupport modify -partner-address

system node autosupport modify -partner-address

autosupport.performance_data.doit autosupport trigger -type perf

system node autosupport trigger -type perf

autosupport.performance_data.enable autosupport modify -perf

system node autosupport modify -perf

autosupport.periodic.tx_window autosupport modify -periodic-tx-window

system node autosupport modify -periodic-tx-window

autosupport.retry.count autosupport modify -retry-count

system node autosupport modify -retry-count

autosupport.retry.interval autosupport modify -retry-interval

system node autosupport modify -retry-interval

autosupport.support.enable autosupport modify -support

system node autosupport modify -support

autosupport.support.proxy autosupport modify -proxy-url

system node autosupport modify -proxy-url

autosupport.support.transport autosupport modify -transport

system node autosupport modify -transport

autosupport.to autosupport modify -to (from nodeshell)

system node autosupport modify -to

autosupport.validate_digital_certificate

autosupport modify -validate-digital-certificate

system node autosupport modify -validate-digital-certificate

B

7-Mode option Clustered Data ONTAP command
backup.log.enable options backup.log.enable

C

7-Mode option Clustered Data ONTAP command
cdpd.enable options cdpd.enable (from nodeshell)

system node run -node {nodename|local} options cdpd.enable

cdpd.holdtime options cdpd.holdtime (from nodeshell)

system node run -node {nodename|local} options cdpd.holdtime

cdpd.interval options cdpd.interval (from nodeshell)

system node run -node {nodename|local} options cdpd.interval

cf.giveback.auto.after.panic.takeover storage failover modify -auto-giveback-after-panic
cf.giveback.auto.delay.seconds storage failover modify -delay-seconds
cf.giveback.auto.enable storage failover modify -auto-giveback
cf.giveback.auto.terminate.bigjobs storage failover modify -abort-operations
cf.giveback.check.partner storage failover modify -check-partner
cf.hw_assist.enable storage failover modify -hwassist
cf.hw_assist.partner.address storage failover modify -hwassist-partner-ip
cf.hw_assist.partner.port storage failover modify -hwassist-partner-port
cf.takeover.detection.seconds storage failover modify -detection-time
cf.takeover.on_failure storage failover modify -node {nodename|local} -onfailure
Note: Available at the advanced privilege level.
cf.takeover.on_panic storage failover modify -onpanic
cf.takeover.on_reboot storage failover modify -onreboot
cf.takeover.on_short_uptime storage failover modify -onshort-uptime
Note: Available at the advanced privilege level.
cifs.audit.autosave.file.limit vserver audit modify -rotate-limit
cifs.audit.enable vserver cifs audit start/stop
cifs.audit.nfs.enable vserver audit modify -state on
cifs.audit.saveas vserver audit modify -destination <target-dir>
cifs.enable_share_browsing vserver cifs share
cifs.gpo.enable vserver cifs group-policy
cifs.grant_implicit_exe_perms vserver cifs options modify -read-grants-exec
cifs.home_dir_namestyle vserver cifs share create
cifs.home_dirs_public_for_admin vserver cifs share access-control modify
cifs.max_mpx vserver cifs options modify -max-mpx
Note: Available at the advanced privilege level.
cifs.ntfs_ignore_unix_security_ops vserver nfs modify -ntfs-unix-security-ops
Note: Available at the advanced privilege level.
cifs.oplocks.enable vserver cifs share modify -share-properties
cifs.show_snapshot vserver cifs share modify -share-properties
cifs.signing.enable vserver cifs security modify -is-signing-required
cifs.smb2.enable vserver cifs options modify -smb2-enabled
Note: Available at the advanced privilege level.
cifs.symlinks.enable vserver cifs share modify -symlink-properties
coredump.dump.attempts system node coredump config modify -coredump-attempts

D

7-Mode option Clustered Data ONTAP command
disk.asup_on_mp_loss system node autosupport trigger modify dsk.redun.fault
disk.auto_assign storage disk option modify -autoassign
disk.maint_center.allowed_entries options disk.maint_center.allowed_entries (from nodeshell)

system node run -node {nodename|local} options disk.maint_center.allowed_entries

disk.maint_center.enable options disk.maint_center.enable (from nodeshell)

system node run -node {nodename|local} options disk.maint_center.enable

disk.maint_center.max_disks options disk.maint_center.max_disks (from nodeshell)

system node run -node {nodename|local} options disk.maint_center.max_disks

disk.maint_center.rec_allowed_entries options disk.maint_center.rec_allowed_entries (from nodeshell)

system node run -node {nodename|local} options disk.maint_center.rec_allowed_entries

disk.maint_center.spares_check options disk.maint_center.spares_check (from nodeshell)

system node run -node {nodename|local} options disk.maint_center.spares_check

disk.powercycle.enable options disk.powercycle.enable (from nodeshell)

system node run -node {nodename|local} options disk.powercycle.enable

disk.recovery_needed.count options disk.recovery_needed (from nodeshell)

system node run -node {nodename|local} options disk.recovery_needed

dns.domainname vserver services dns modify -domains
dns.enable vserver services dns modify -state

E

7-Mode option Clustered Data ONTAP command
ems.autosuppress.enable event config modify -throttle

F

7-Mode option Clustered Data ONTAP command
fcp.enable fcp start
flexcache.access vserver export-policy rule modify rule -protocol flexcache
flexcache.enable vserver export-policy rule modify rule -protocol flexcache
flexscale.enable options flexscale.enable (from nodeshell)

system node run -node {nodename|local} options flexscale.enable

flexscale.lopri_blocks options flexscale.lopri_blocks (from nodeshell)

system node run -node {nodename|local} options flexscale.lopri_blocks

flexscale.normal_data_blocks options flexscale.normal_data_blocks (from nodeshell)

system node run -node {nodename|local} options flexscale.normal_data_blocks

flexscale.pcs_high_res options flexscale.pcs_high_res (from nodeshell)

system node run -node {nodename|local} options flexscale.pcs_high_res

flexscale.pcs_size options flexscale.pcs_size (from nodeshell)

system node run -node {nodename|local} options flexscale.pcs_size

flexscale.rewarm options flexscale.rewarm (from nodeshell)

system node run -node {nodename|local} options flexscale.rewarm

fpolicy.enable vserver fpolicy enable

H

7-Mode option Clustered Data ONTAP command
httpd.admin.access vserver services web -enabled
httpd.admin.enable vserver services web -enabled OR

system services web modify -external

httpd.admin.ssl.enable system services web OR

vserver services web

I

7-Mode option Clustered Data ONTAP command
interface.blocked.cifs network interface create -data-protocol
interface.blocked.iscsi network interface create -data-protocol OR

network interface modify -firewall-policy

interface.blocked.mgmt_data_traffic network interface modify -firewall-policy
interface.blocked.ndmp network interface modify -firewall-policy
interface.blocked.nfs network interface create -data-protocol
interface.blocked.snapmirror network interface create -role
ip.fastpath.enable options ip.fastpath.enable (from nodeshell)

system node run -node {nodename|local} options ip.fastpath.enable

ip.path_mtu_discovery.enable options ip.path_mtu_discovery.enable (from nodeshell)

system node run -node {nodename|local} options ip.path_mtu_discovery.enable

ip.ping_throttle.alarm_interval options ip.ping_throttle.alarm_interval (from nodeshell)

system node run -node {nodename|local} options ip.ping_throttle.alarm_interval

ip.ping_throttle.drop_level options ip.ping_throttle.drop_level (from nodeshell)

system node run -node {nodename|local} options ip.ping_throttle.drop.level

ip.tcp.abc.enable options ip.tcp.abc.enable (from nodeshell)

system node run -node {nodename|local} options ip.tcp.abc.enable

ip.tcp.abc.l_limit options ip.tcp.abc.l_limit (from nodeshell)

system node run -node {nodename|local} options ip.tcp.abc.l_limit

ip.tcp.batching.enable options ip.tcp.batching.enable (from nodeshell)

system node run -node {nodename|local} options ip.tcp.batching.enable

ip.tcp.newreno.enable options ip.tcp.newreno.enable (from nodeshell)

system node run -node {nodename|local} options ip.tcp.newreno.enable

ip.tcp.rfc3390.enable options ip.tcp.rfc3390.enable (from nodeshell)

system node run -node {nodename|local} options ip.tcp.rfc3390.enable

ip.tcp.sack.enable options ip.tcp.sack.enable (from nodeshell)

system node run -node {nodename|local} options ip.tcp.sack.enable

ip.v6.enable network options ipv6 modify
iscsi.enable vserver iscsi start
iscsi.max_connections_per_session vserver iscsi modify -max-conn-per-session
Note: Available at the advanced privilege level.
iscsi.max_error_recovery_level vserver iscsi modify -max-error-recovery-level
Note: Available at the advanced privilege level.

L

7-Mode option Clustered Data ONTAP command
ldap.ADdomain vserver services ldap client modify -ad-domain
ldap.base vserver services ldap client modify -base-dn OR

vserver services ldap client modify -base-scope

ldap.base.group vserver services ldap client modify -group-dn OR
vserver services ldap client modify -group-scope
Note: Available at the advanced privilege level.
ldap.base.netgroup vserver services ldap client modify -netgroup-dn OR
vserver services ldap client modify -netgroup-scope
Note: Available at the advanced privilege level.
ldap.base.passwd ldap client modify -user-dn
ldap.enable vserver services ldap modify OR

vserver modify -ns-switch OR

vserver modify -nm-swtich

ldap.minimum_bind_level vserver services ldap client modify -min-bind-level
ldap.name vserver services ldap client modify -bind-dn
ldap.nssmap.attribute.gecos vserver services ldap client schema modify -gecos-attribute
Note: Available at the advanced privilege level.
ldap.nssmap.attribute.gidNumber vserver services ldap client schema modify -gid-number-attribute
Note: Available at the advanced privilege level.
ldap.nssmap.attribute.groupname vserver services ldap client schema modify -cn-group-attribute
Note: Available at the advanced privilege level.
ldap.nssmap.attribute.homeDirectory vserver services ldap client schema modify -home-directory-attribute
Note: Available at the advanced privilege level.
ldap.nssmap.attribute.loginShell vserver services ldap client schema modify -login-shell-attribute
Note: Available at the advanced privilege level.
ldap.nssmap.attribute.memberNisNetgroup vserver services ldap client schema modify -member-nis-netgroup-attribute
Note: Available at the advanced privilege level.
ldap.nssmap.attribute.memberUid vserver services ldap client schema modify -member-uid-attribute
Note: Available at the advanced privilege level.
ldap.nssmap.attribute.netgroupname vserver services ldap client schema modify -cn-netgroup-attribute
Note: Available at the advanced privilege level.
ldap.nssmap.attribute.nisNetgroupTriple vserver services ldap client schema modify -nis-netgroup-triple-attribute
Note: Available at the advanced privilege level.
ldap.nssmap.attribute.uid vserver services ldap client schema modify -uid-attribute
Note: Available at the advanced privilege level.
ldap.nssmap.attribute.uidNumber vserver services ldap client schema modify -uid-number-attribute
Note: Available at the advanced privilege level.
ldap.nssmap.attribute.userPassword vserver services ldap client schema modify -user-password-attribute
Note: Available at the advanced privilege level.
ldap.nssmap.objectClass.nisNetgroup vserver services ldap client schema modify -nis-netgroup-object-class
Note: Available at the advanced privilege level.
ldap.nssmap.objectClass.posixAccount vserver services ldap client schema modify -posix-account-object-class
Note: Available at the advanced privilege level.
ldap.nssmap.objectClass.posixGroup vserver services ldap client schema modify -posix-group-object-class
Note: Available at the advanced privilege level.
ldap.passwd vserver services ldap client modify -bind-password
ldap.port vserver services ldap client modify -port
ldap.servers vserver services ldap client modify -servers
ldap.servers.preferred vserver services ldap client modify -preferred-ad-servers
ldap.timeout vserver services ldap client modify -query-timeout
ldap.usermap.attribute.unixaccount vserver services ldap client schema modify -unix-account-attribute
Note: Available at the advanced privilege level.
ldap.usermap.attribute.windowsaccount vserver services ldap client schema modify -windows-account-attribute
Note: Available at the advanced privilege level.
ldap.usermap.base vserver services ldap client modify -user-dn OR
vserver services ldap client modify -user-scope
Note: Available at the advanced privilege level.
ldap.usermap.enable vserver modify -nm-switch
licensed_feature.fcp.enable license add
licensed_feature.iscsi.enable license add
locking.grace_lease_seconds vserver nfs modify -v4-grace-seconds
Note: Available at the advanced privilege level.

N

7-Mode option Clustered Data ONTAP command
ndmpd.abort_on_disk_error options ndmpd.abort_on_disk_error
Note: Available at the advanced privilege level.
ndmpd.access system services firewall policy modify
ndmpd.authtype system services ndmpd modify -clear-text
ndmpd.connectlog.enabled options ndmpd.debug.enable OR

options ndmpd.dump.detailed_stats

Note: Available at the advanced privilege level.
ndmpd.data_port_range options ndmpd.data_port_range
ndmpd.enable system services ndmpd modify -enable
ndmpd.ignore_ctime.enabled options ndmpd.ignore_ctime.enabled
ndmpd.maxversion system services ndmp version -maxversion
ndmpd.offset_map.enable options ndmpd.offset_map.enable
ndmpd.preferred_interface vserver services ndmp modify -vserver <name> -preferred-interface-role
ndmpd.tcpnodelay.enable options ndmpd.tcpnodelay.enable
ndmpd.tcpwinsize options ndmpd.tcpwinsize
nfs.kerberos.enable vserver services Kerberos-realm create OR

vserver nfs kerberos-config modify

nfs.kerberos.file_keytab.enable vserver services Kerberos-realm create OR

vserver nfs kerberos-config modify

nfs.kerberos.file_keytab.principal vserver services Kerberos-realm create OR

vserver nfs kerberos-config modify

nfs.kerberos.file_keytab.realm vserver services Kerberos-realm create OR

vserver nfs kerberos-config modify

nfs.mount_rootonly vserver nfs modify -mount-rootonly
nfs.per_client_stats.enable statistics settings modify -client stats
nfs.response.trace vserver nfs modify -trace-enabled
Note: Available at the advanced privilege level.
nfs.response.trigger vserver nfs modify -trigger
Note: Available at the advanced privilege level.
nfs.rpcsec.ctx.high nfs modify -rpcsec-ctx-high
Note: Available at the advanced privilege level.
nfs.rpcsec.ctx.idle nfs modify -rpcsec-ctx-idle
Note: Available at the advanced privilege level.
nfs.tcp.enable vserver nfs modify -tcp
nfs.thin_prov.ejuke vserver nfs modify -enable-ejukebox
Note: Available at the advanced privilege level.
nfs.udp.enable vserver nfs modify -udp
nfs.udp.xfersize vserver nfs modify -udp-max-xfer-size
nfs.v3.enable vserver nfs modify -v3
nfs.v4.acl.enable vserver nfs modify -v4.0-acl
nfs.v4.enable vserver nfs modify -v4.0
nfs.v4.id.domain vserver nfs modify -v4-id-domain
nfs.v4.read_delegation vserver nfs modify -v4.0-read-delegation
nfs.v4.write_delegation vserver nfs modify -v4.0-write-delegation
nis.domainname nis modify -domain

vserver services nis-domain modify -domain

nis.enable nis modify -active

vserver services nis-domain modify -active

nis.servers nis modify -servers

R

Note: All raid options have 7-Mode-compatible nodeshell shortcuts of the form options optionname.
7-Mode option Clustered Data ONTAP command
raid.background_disk_fw_update.enable storage raid-options modify -raid.background_disk_fw_update.enable
raid.disk.copy.auto.enable storage raid-options modify -raid.disk.copy.auto.enable
raid.disk.timeout.enable options raid.disk.timeout.enable (from nodeshell)

system node run -node {nodename|local} options raid.disk.timeout.enable

raid.disktype.enable storage raid-options modify - raid.disktype.enable
raid.lost_write.enable raid-options modify raid.lost_write.enable

Note: Available at the advanced privilege level.

raid.media_scrub.rate storage raid-options modify -raid.media_scrub.rate
raid.min_spare_count storage raid-options modify -raid.min_spare_count
raid.mirror_read_plex_pref storage raid-options modify -raid.mirror_read_plex_pref
raid.reconstruct.perf_impact storage raid-options modify -raid.reconstruct.perf_impact
raid.resync.perf_impact storage raid-options modify -raid.resync.perf_impact
raid.scrub.duration storage raid-options modify -raid.scrub.duration
raid.scrub.perf_impact storage raid-options modify -raid.scrub.perf_impact
raid.scrub.schedule storage raid-options modify -raid.scrub.schedule
raid.timeout storage raid-options modify -raid.timeout
raid.verify.perf_impact storage raid-options modify -raid.verify.perf_impact
replication.throttle.enable snapmirror modify -throttle
rquotad.enable nfs modify -rquota
rsh.access

firewall policy create -policy mgmt -service rsh -action allow -ip-list

rsh.enable

firewall policy create -policy mgmt -service rsh -action allow -ip-list

S

7-Mode option Clustered Data ONTAP command
security.admin.authentication security login modify
security.admin.nsswitchgroup security login modify
security.passwd.firstlogin.enable security login role config modify
security.passwd.lockout.numtries security login role config modify
security.passwd.rootaccess.enable security login modify
security.passwd.rules.enable security login role config modify
security.passwd.rules.everyone security login role config modify
security.passwd.rules.history security login role config modify
security.passwd.rules.maximum security login role config modify
security.passwd.rules.minimum security login role config modify
security.passwd.rules.minimum.alphabetic security login role config modify
security.passwd.rules.minimum.digit security login role config modify
security.passwd.rules.minimum.symbol security login role config modify
shelf.atfcx.auto.reset.enable options shelf.atfcx.auto.reset.enable (from nodeshell)

system node run -node {nodename|local} options shelf.atfcx.auto.reset.enable

shelf.esh4.auto.reset.enable options shelf.esh4.auto.reset.enable (from nodeshell)

system node run -node {nodename|local} options shelf.esh4.auto.reset.enable

shelf.fw.ndu.enable options shelf.fw.ndu.enable (from nodeshell)

system node run -node {nodename|local} options shelf.fw.ndu.enable

snapmirror.access snapmirror create

vserver peer

snapvault.access snapmirror policy
snapvault.preservesnap snapmirror policy
snapvault.snapshot_for_dr_backup snapmirror policy
snmp.access system services firewall policy modify OR

network interface modify

snmp.enable options snmp.enable
ssh.access security login modify
ssh.enable firewall policy create -policy <policy name> -service ssh -action <allow/deny> -ip-list

Note: This command has to be run per firewall policy where ssh has to be enabled/disabled. There is no one command for the entire cluster. Allow takes precedence over deny.

ssh.pubkey_auth.enable security login modify -authmethod publickey
ssl.enable security ssl modify -enabled

T

7-Mode option Clustered Data ONTAP command
tape.reservations options tape.reservations
telnet.access firewall policy create -policy mgmt -service telnet -action allow -ip-list
telnet.enable firewall policy create -policy mgmt -service telnet -action allow -ip-list
timed.enable system services ntp config modify -enabled
timed.proto system services ntp server modify -version
timed.servers system services ntp server modify -server

W

7-Mode option Clustered Data ONTAP command
wafl.default_nt_user vserver nfs modify -default-win-user
wafl.default_unix_user vserver cifs options modify -default-unix-user
wafl.group_cp options wafl.group_cp (from nodeshell)

system node run -node {nodename|local} options wafl.group_cp

wafl.inconsistent.asup_frequency.blks options wafl.inconsistent.asup_frequency.blks (from nodeshell)

system node run -node {nodename|local} options wafl.inconsistent.asup_frequency.blks

wafl.inconsistent.asup_frequency.time options wafl.inconsistent.asup_frequency.time (from nodeshell)

system node run -node {nodename|local} options wafl.inconsistent.asup_frequency.time

wafl.inconsistent.ems_suppress options wafl.inconsistent.ems_suppress (from nodeshell)

system node run -node {nodename|local} options wafl.inconsistent.ems_suppress

wafl.maxdirsize options wafl.maxdirsize (from nodeshell)

system node run -node {nodename|local} options wafl.maxdirsize

wafl.nt_admin_priv_map_to_root vserver name-mapping create
wafl.root_only_chown vserver nfs modify -chown-mode