Index  |  Top  -  Up Data ONTAP 8.2

system node halt

Shut down a node

Availability: This command is available to cluster administrators at the admin privilege level.


The system node halt command stops all activity on a node. You may supply a reason for the shutdown, which will be stored in the audit log. You may also keep partner nodes from performing storage takeover during the shutdown.


-node {<nodename>|local} - Node

Use this mandatory parameter to specify the node that you want to shut down. The value local specifies the current node.

[-reason <text>] - Reason for Shutdown

Use this parameter to enter a brief note to indicate the reason for the restart, which will be stored in the audit log. Providing this information assists support personnel with troubleshooting efforts.

[-inhibit-takeover | -f [true]] - Disallow Storage Takeover by Partner

This parameter optionally forces the shutdown and prevents storage failover.

If you enter this command without using this parameter, its effective value is false and storage takeover is allowed. If you enter this parameter without a value, it is automatically set to true and storage takeover is disabled during reboot.

[-dump | -d [true]] - Create a Core Dump

If this parameter is set to true, it forces a dump of the kernel core when halting the node.

[-skip-lif-migration [true]] - Skip Migrating LIFs Away from Node

If this parameter is specified, LIF migration prior to the shutdown will be skipped. The default is to migrate LIFs prior to the shutdown. In the default case, the command attempts to synchronously migrate data and cluster management LIFs away from the node prior to shutdown. If the migration fails or times out, the shutdown will be aborted.


The following example shuts down the node named cluster1 for hardware maintenance:
cluster::> system halt -node cluster1 -reason 'hardware maintenance'

See Also

storage failover show  
Index  |  Top  -  Up Data ONTAP 8.2

Copyright © 1994-2013 NetApp, Inc. Legal Information