Index  |  Top  -  Up Data ONTAP 8.2

vserver fcp modify

Modify FCP service configuration

Availability: This command is available to cluster and Vserver administrators at the admin privilege level.

Description

This command modifies an FCP service configuration on a Vserver.

If the target name provided is outside the vendor's namespace, the user must verify that the target name is unique outside the cluster. The vendor cannot verify that the target name is unique outside the cluster if the vendor did not generate the target name.

Parameters

-vserver <vserver name> - Vserver Name

Specifies the Vserver.

[-target-name <text>] - Target Name (privilege: advanced)

Specifies the World Wide Node Name (WWNN). The format for a WWNN is XX:XX:XX:XX:XX:XX:XX:XX where X is a hexadecimal digit. To be compatible with existing registered names, the format for a new WWNN should be 2X:XX:00:0a:98:XX:XX:XX, where X is a hexadecimal digit. If the unique WWNN does not match this format, use the -f parameter.

[-status-admin {down|up}] - Administrative Status

Specifies the configured administrative status of an FCP service. If you set this parameter to up, the command displays all FCP services with the administrative status of up. If you set this parameter to down, the command displays all FCP services with the administrative status of down.

[-force | -f [true]] - Force (privilege: advanced)

When this parameter is used, the command accepts a WWNN that is not in the valid format of 2X:XX:0a:09:80:XX:XX:XX.

Examples

cluster1::> vserver fcp modify -vserver vs_1 -status-admin down
       

The example above changes the administration status of the FCP service on Vserver vs_1 to down.


Index  |  Top  -  Up Data ONTAP 8.2

Copyright © 1994-2013 NetApp, Inc. Legal Information