Table of ContentsView in Frames

Displaying information about tape drive connections to the storage system

You can view the information about a tape drive connection to the storage system. You can view information such as the SCSI ID, Vendor ID, Product ID, and firmware version.


  1. Enter the following command:
    sysconfig -v


This example shows a tape medium changer with SCSI ID 6 and a tape drive with SCSI ID 4 attached to slot 6 of the storage system. The SCSI firmware is 2.26, and the SCSI adapter clock rate is 60 MHz.

slot 6: SCSI Host Adapter 6 (QLogic ISP 1040B) Firmware Version 2.26 Clock Rate 60MHz. 6: BHTi Quad 7 1.41 4: QUANTUM DLT7000 1B41