Table of ContentsView in Frames

Removing tape aliases

You can remove aliases from tape drives, medium changers, or both, using the storage unalias command.

Step

  1. To remove an alias from a tape drive or medium changer, enter the following command:
    storage unalias {alias | -a | -m | -t}

    alias is the logical name of the tape drive or medium changer from which you want to remove the alias.

    -a removes all aliases.

    -m removes the aliases from all medium changers.

    -t removes the aliases from all tape drives.

Examples

storage unalias st0
storage unalias mc80
Parent topic: Tape drive management
Copyright © 1994-2013, NetApp, Inc. All rights reserved.
Part No. 215-07983_A0
May 2013