Sometimes you might encounter a problem while running Veritas Storage Foundation with the Host Utilities. The sections that follow provide tips for resolving any issues that might occur.
(Veritas) Secondary paths identified incorrectly
Secondary paths are identified incorrectly as primary paths while configuring VxDMP. In such a scenario, you should verify that the ASL for the storage system was installed correctly and that no error messages occurred during installation.
(Veritas) Enclosure-based naming not reflected on NetApp storage
The VxVM enclosure-based naming feature is enabled, but the VxDMP devices do not contain a storage model string. In such a scenario, verify that the ASL for the storage system was installed correctly and that no error messages occurred during installation.
(Veritas) Setting up a LUN for SAN booting fails
The process to set up a LUN for SAN booting fails if you have multiple paths configured to the boot LUN before installing the operating system. You should verify that the host can see only one path to the LUN.