Table of ContentsView in Frames

Options to use when configuring SNMP

You should be aware of the necessary options that you can set when configuring SNMP.

Location Enter the location of the SNMP agent.
Contact Enter the contact person for the SNMP agent.
Community name Enter a single read-only community string for SNMPv1 and SNMPv2.
Username, engine ID and authentication protocol Enter a user name, engine ID of the SNMP agent, and authentication type to use with SNMPv3.
Note: The default and recommended value for engine ID is local EngineID.
Trap Enable or disable SNMP traps.
Host Enter the destination host IP address.