Table of ContentsView in Frames

Disks window

You can use the Disks window to view all the disks in your storage system.

Command buttons

Refresh
Updates the information in the window.

Tabs

Summary

Displays detailed information about the disks in the cluster, including the size of the spare disks and assigned disks. The tab also graphically displays information about spare disks, aggregates, and root aggregates for HDDs and information about spare disks, disks in a storage pool, aggregates, Flash Pool aggregates, and root aggregates for cache disks (SSDs).

The HDD panel is not displayed for systems with All Flash Optimized personality.

The details panel below provides additional information about spare disks (disk type, node, disk size, RPM, checksum, number of spare disks, and spare capacity), in tabular format.

Inventory

Name
Displays the name of the disk.
Container Type
Displays the purpose for which the disk is used. The possible values are Aggregate, Broken, Foreign, Label Maintenance, Maintenance, Shared, Spare, Unassigned, Volume, Unknown, and Unsupported.
Node Name
Displays the name of the node that contains the aggregate.

This field is available only at the cluster level.

Type
Displays the type of the disk.
Firmware Version
Displays the firmware version of the disk.
Model
Displays the model of the disk.
RPM
Displays the effective speed of the disk drive when the option raid.mix.hdd.rpm.capacity is enabled and displays the actual speed of the disk drive when the option raid.mix.hdd.rpm.capacity is disabled.

This field is not applicable to SSDs.

Effective Size
Displays the usable space available on the disk.
Physical Space
Displays the total physical space of the disk.
Shelf
Displays the shelf in which the physical disks are located.

This field is hidden by default.

Bay
Displays the bay within the shelf for the physical disk.

This field is hidden by default.

Pool
Displays the name of the pool to which the selected disk is assigned.

This field is hidden by default.

Checksum
Displays the type of the checksum.

This field is hidden by default.

Carrier ID
Specifies information about disks that are located within the specified multi-disk carrier. The ID is a 64-bit value.

This field is hidden by default.

Inventory details area

The area below the inventory displays detailed information about the selected disk, including information about the aggregate or volume (if applicable), vendor ID, zeroing state (in percent), serial number of the disk, and error details in case of a broken disk. For shared disks, the details area displays the names of all the aggregates, including the root and the non-root aggregates.