Table of ContentsView in Frames

Verifying storage health

Your aggregates must be online before you start the upgrade.

Step

  1. From the CLI, verify that all aggregates are online: storage aggregate show
    Example
    COT2::> storage aggregate show
    
    Aggregate   Size Available Used% State   #Vols  Nodes      RAID Status
    --------- ------ --------- ----- ------- ------ ---------- -----------
    aggr0    124.0GB   56.90GB   54% online       1 COT2-01    raid0,
                                                                 normal
    aggr1    442.9GB   431.9GB    3% online       3 COT2-01    raid0,
                                                                 normal
    2 entries were displayed.
    If any aggregates are offline, use the storage aggregate online command to bring the aggregates online.