Table of ContentsView in Frames

Destroying aggregates

An aggregate must be taken offline for destroying. You can take SnapLock aggregates offline only when they do not contain flexible volumes. You must destroy the flexible volumes contained in an aggregate before you can destroy the aggregate. This applies to all flexible volumes within SnapLock aggregates.

Steps

  1. Destroy all flexible volumes contained within the aggregate you want to destroy, by using the vol destroy command.
  2. To take the aggregate offline, enter the following command: aggr offline aggr_name
    aggr_name is the name of the aggregate that you intend to destroy and whose disks you are converting to hot spares.
  3. Destroy the aggregate by entering the following command: aggr destroy aggr_name
    aggr_name is the name of the aggregate that you are destroying and whose disks you are converting to hot spares.