Manual Pages


Table of Contents

NAME

nbtstat - displays information about the NetBIOS over TCP connection

SYNOPSIS

nbtstat

DESCRIPTION

The nbtstat command displays information about the NetBIOS over TCP (NBT) connection for the Node. It displays the IP address associated with the interfaces, the broadcast IP mask, the IP addresses of the WINS servers in use, and information about the registered NetBIOS names for the node.

EXAMPLES

         FAS*> nbtstat
         interfaces:
                  10.120.5.39

         broadcast interfaces:
                  10.120.7.255

         servers:
                  10.10.10.55 (active)
                  10.10.10.56 ()
         NBT scope []; NBT mode [H]; NBT names:
                  FILER           <00> ( WINS) ( time left=302 )
                  FILER           <03> ( WINS) ( time left=302 )
                  FILER           <20> ( WINS) ( time left=302 )
                  NT-DOMAIN       <00> ( WINS) ( time left=302 group )

LIMITATIONS

Nothing will be printed if the CIFS subsystem has never been initialized.

Note that this is not the same as the NT nbtstat command. However, in the future, this command may become more aligned with the NT command.

VFILER CONSIDERATIONS

When run from a vfiler context, (e.g. via the vfiler run command), nbtstat operates on the concerned vfiler.

SEE ALSO

na_ifconfig(1), na_vfiler(1)


Table of Contents