Manual Pages
Table of Contents
na_cloned_tapes - List of non-qualified tape drives
attached to the node
/etc/cloned_tapes
If you attach a tape drive that NetApp Inc has not tested
with the node, enter information about the tape drive in
the /etc/cloned_tapes file. This file enables the node to
register the drive as a clone of a qualified drive.
If the node boots with a nonqualified tape drive and the
/etc/cloned_tapes file does not exist, the node creates a
sample file, when the first "mt" command for the tape is
executed.
Each entry in the /etc/cloned_tapes file corresponds to
one tape drive. Specify the entry in one of the following
formats:
clone_vendor_id clone_product_id EMULATES vendor_id
product_id
clone_product_id EMULATES product_id
The "storage show tape supported" command provides a list
the product_id and vendor_id values of qualified drives.
The following entry in the /etc/cloned_tapes file enables
the node to register the Quantum DLT9000 tape drive, which
has not been tested with the node, as a clone of the
Quantum DLT7000 tape drive:
QUANTUM DLT9000 EMULATES QUANTUM DLT7000
na_mt(1), na_storage(1)
Table of Contents