Displaying disk and array LUN information on an HA pair

To find out about the disks, array LUNs, or both on both the local and partner node, you can use the sysconfig and aggr status commands, which display information about both nodes.

For each node, the sysconfig command output displays disks on both channel A and channel B:

  • The information about disks on channel A is the same as for storage systems not in an HA pair .
  • The information about disks on channel B is for hardware only; the sysconfig command displays information about the adapters supporting the disks.

    The command does not show whether a disk on channel B is a file system disk, spare disk, or parity disk.

  1. Enter one of the following commands:sysconfig -r or aggr status -r