Table of ContentsView in Frames

Enabling or disabling GVRP on your VLAN interface

GVRP dynamically registers the VLAN memberships of stations on your network. This reduces the overhead of maintaining static VLAN configuration on switch ports every time a change occurs in your network. To enable or disable GVRP on all interfaces of a network adapter, you should use the vlan modify command.

About this task

Step

  1. Enter the following command: vlan modify -g {on|off} adap_name
    -g on enables GVRP.
    -g off disables GVRP.
    adap_name is the name of the network adapter.