Table of ContentsView in Frames

Viewing VLAN statistics

You can use the vlan stat command to view the statistics of all VLANs configured on a network interface. You can view the frames received and transmitted on an interface and the number of frames that were rejected because the frames did not belong to any of the VLAN groups.


  1. Enter the following command: vlan stat interface_name
    interface_name is the name of the network interface.
    The following example displays the statistics of all VLANs on a storage system:
    vlan stat e4 
    Vlan Physical Interface: e4 (5 hours, 50 minutes, 38 seconds) -- 
    Vlan IDs: 3,5
    GVRP: enabled
    Total frames: 0 | Total bytes: 0 |Multi/broadcast: 0 
    Untag drops:0 | Vlan tag drops: 0 
    Total frames: 8 | Total bytes: 368 
    Vlan Interface: e4-3 (0 hours, 20 minutes, 45 seconds) -- 
    ID: 3 MAC Address: 00:90:27:5c:58:14