Table of ContentsView in Frames

Support for iSCSI DCB

iSCSI data Center bridging (DCB) can assign priority and allocate bandwidth to network traffic based on the traffic protocol. Beginning in Data ONTAP 8.2.1, DCB is supported in iSCSI. DCB can be enabled on networks for FCoE, iSCSI, and other NIC traffic sharing the same physical CNA interface

You can display DCB settings through Data ONTAP, but you must enable and configure your DCB settings through your switch.

Note: iSCSI DCB support is only available on the QLogic 8300 series dual port 10GbE CNA adapter.