Table of ContentsView in Frames

Removing a RADIUS server

You can use the radius remove command to ensure that a RADIUS server is no longer used for RADIUS authentication.

Step

  1. Enter the following command: radius remove RADIUS_server_hostname or ip_address[-p port_number]

    If the server is using a port other than 1812, use the -p option to specify the port number.

Example

system1> radius show
RADIUS client service is running

Default RADIUS server : IP_Addr=10.60.155.58 UDPPort=1812

system1> radius remove 10.60.155.58
system1> radius show
RADIUS client service is running