Data ONTAP® 8.2
SAN Configuration Guide
For 7-Mode
Updated for 8.2.1
iSCSI configurations
Single-network and multi-network single-controller configuration in an iSCSI SAN
Single-network HA pair in an iSCSI SAN
Multi-network HA pair in an iSCSI SAN
Direct-attached single-controller configurations in an iSCSI SAN
VLANs for iSCSI configurations
Static VLANs
Dynamic VLANs
Fibre Channel configurations
Recommended number of paths to avoid single points of failure
FC onboard and expansion port combinations
Fibre Channel supported hop counts
Fibre Channel supported speeds
Fibre Channel switch configuration best practices
Host multipathing software requirements
FAS80xx supported fibre channel configurations
FAS8040 and FAS8060 target port configuration recommendations
FAS8020 target port configuration recommendations
FAS80xx single-fabric HA pair
FAS80xx series single-controller configuration
FAS80xx multifabric HA configurations
FAS80xx direct-attached single controller configurations
FAS80xx direct-attached HA configurations
62xx supported fibre channel configurations
62xx target port configuration recommendations
62xx: Single-fabric HA configurations
62xx: Single-controller configurations
62xx: Multifabric HA configurations
62xx: Direct-attached single-controller configurations
62xx: Direct-attached HA configurations
60xx supported configurations
60xx target port configuration recommendations
60xx : Single-controller configurations
60xx : Single-fabric HA pair
60xx : Multifabric HA pair
60xx : Direct-attached single-controller configuration
60xx : Direct-attached HA pair
32xx supported fibre channel configurations
32xx target port configuration recommendations
32xx: Single-controller configurations
32xx: Single-fabric HA configurations
32xx: Multifabric HA configurations
32xx: Direct-attached single-controller configurations
32xx: Direct-attached HA configurations
FAS2240 supported configurations
FAS2240: Single-fabric single-controller configuration
FAS2240: Single-fabric HA pair
FAS2240: Multifabric single-controller configuration
FAS2240: Multifabric HA pair
FAS2240: Direct-attached single-controller configurations
FAS2240: Direct-attached HA pair
31xx supported fibre channel configurations
31xx target port configuration recommendations
31xx : Single-controller configurations
31xx : Single-fabric HA pair
31xx : Multifabric HA pair
31xx : Direct-attached single-controller configurations
31xx : Direct-attached HA Pair
Fibre Channel over Ethernet overview
Recommended number of paths to avoid single points of failure
FCoE initiator and target combinations
Fibre Channel over Ethernet supported hop count
Fibre Channel over Ethernet supported configurations
FCoE initiator to FC target configuration
FCoE end-to-end configuration
FCoE mixed with FC
FCoE mixed with IP storage protocols
Fibre Channel and FCoE zoning
Port zoning
World Wide Name-based zoning
Individual zones
Single-fabric zoning
Dual-fabric HA pair zoning
Shared SAN configurations
ALUA configurations
Configuration limits for FC, FCoE, and iSCSI configurations
SAN Configuration limit parameters and definitions
Host operating system limits for SAN configurations
FAS80xx single-controller limits
FAS80xx HA configuration limits
62xx single-controller limits
62xx HA configuration limits
32xx single-controller limits
32xx HA configuration limits
FAS2220, FAS2240 single-controller limits
FAS2220, FAS2240 HA configuration limits
60xx and 31xx single-controller limits
60xx and 31xx HA pair limits
Data ONTAP-v platform limits
Calculating queue depth
Setting queue depths on AIX hosts
Setting queue depths on HP-UX hosts
Setting queue depths on Solaris hosts
Setting queue depths on VMware hosts
Setting queue depths on Windows hosts
Copyright information
Trademark information
How to send your comments
