Table of ContentsView in Frames

Accessing the serial console from the RLM

The RLM's system console command enables you to log in to the serial console from the RLM.

Steps

  1. Enter the following command at the RLM prompt: system console
    The message Type Ctrl-D to exit appears.
  2. Press Enter to see the system prompt.
  3. To exit the serial console and return to the RLM CLI, press Ctrl-D.

Example of accessing the serial console from the RLM

The following example shows the result of entering the system console command at the RLM prompt. The vol status command is entered at the console, followed by Ctrl-D, which returns you to the RLM prompt.
RLM> system console
Type Ctrl-D to exit.

(Press Enter to see the storage system prompt.)
toaster>
toaster> vol status
(Command output is displayed.)
(Press Ctrl-D to exit the storage serial console and return to the RLM CLI.)
RLM>