There are few commands that help you in configuring SnapDrive for UNIX.
Command or action | Description |
---|---|
Configuring and verifying your version of SnapDrive for UNIX software | |
snapdrive config show | Check the values in the snapdrive.conf file. |
snapdrive version | Check the version of SnapDrive for UNIX. |
snapdrived start | Start the SnapDrive for UNIX daemon. |
snapdrive config prepare luns -count count_value | Prepare the host for creating a specific number of LUNs as well as to determine how many LUNs you can create. |
snapdrive config set -viadmin <user> <viadmin_name> | Prepare the guest for creating RDM LUN on Linux guest OS.
Note: You can use these commands only on Linux host by using FCP protocol with no host utilities.
|
snapdrive clone split | Estimate, start, stop, and query the status of split for a volume clone or a LUN clone. |
Edit the variables in the snapdrive.conf file. | Change the path name and options for the log files. SnapDrive for UNIX logs information to three files:
|
Setting and displaying access control permissions between a host and a storage system. | |
Edit the access control permissions file (sd hostname.prbac) on the storage system associated with that host. | Specify the access control permissions a host has on a storage system. You can set the following access levels for a host on a storage system:
|
snapdrive config access show <filer_name> | Display information about the access control permissions a host has to a storage system. |
snapdrive config delete <filername> [<filername> . . .] | Remove the specified user name-password pair from SnapDrive for UNIX. |