Aliasing simplifies the process of device identification. Aliasing binds a physical path name (PPN) or a serial number (SN) of a tape or a medium changer to a persistent, but modifiable alias name.
The following table describes how tape aliasing enables you to ensure that a tape drive (or tape library or medium changer) is always associated with a single alias name:
||Reassigning of the alias
|When the system reboots
||The tape drive is automatically reassigned its previous alias.
|When a tape device moves to another port
||The alias can be adjusted to point to the new address.
|When more than one system uses a particular tape device
||The user can set the alias to be the same for all the systems.
Note: When you upgrade from Data ONTAP 8.1.x to Data ONTAP 8.2.x, the tape alias feature of Data ONTAP 8.2.x modifies the existing tape alias names. In such a case you might have to update the tape alias names in the backup application.
Assigning tape aliases provides a correspondence between the logical names of backup devices (for example, st0 or mc1) and a name permanently assigned to a port, a tape drive, or a medium changer.
Note: st0 and st00 are different logical names.
Note: Logical names and serial numbers are used only to access a device. After the device is accessed, it returns all error messages by using the physical path name.
There are two types of names available for aliasing: physical path name and serial number.