Cable the new MetroCluster controllers to the existing FC fabrics

On each controller module in the clustered Data ONTAP MetroCluster configuration, the FC-VI adapter and HBAs must be cabled to specific ports on the existing FC switches.

1. Cable the FC-VI and HBA ports according to the following table:

   Site A		Site B
   Connect this Site A component and port...	To this port on FC_switch_A_1...	Connect this Site B component and port...	To this port on FC_switch_B_1...
   controller_A_1 FC-VI port 1	32	controller_B_1 FC-VI port 1	32
   controller_A_1 HBA port 1	33	controller_B_1 HBA port 1	33
   controller_A_1 HBA port 2	34	controller_B_1 HBA port 2	34
   controller_A_2 FC-VI port 1	35	controller_B_2 FC-VI port 1	35
   controller_A_2 HBA 1	36	controller_B_2 HBA 1	36
   controller_A_2 HBA 2	37	controller_B_2 HBA 2	37

2. Cable each FC-SAS bridge in the first switch fabric to the FC switches.
   The number of bridges varies depending on the number of SAS storage stacks.

   Site A		Site B
   Cable this site A bridge...	To this port on FC_switch_A_1...	Cable this Site B bridge...	To this port on FC_switch_B_1...
   bridge_A_1_38	38	bridge_B_1_38	38
   bridge_A_1_39	39	bridge_B_1_39	39
   bridge_A_1_40	40	bridge_B_1_40	40
   bridge_A_1_41	41	bridge_B_1_41	41
   bridge_A_1_42	42	bridge_B_1_42	42
   bridge_A_1_43	43	bridge_B_1_43	43
   bridge_A_1_44	44	bridge_B_1_44	44
   bridge_A_1_45	45	bridge_B_1_45	45

3. Cable each bridge in the second switch fabric to the FC switches.
   The number of bridges varies depending on the number of SAS storage stacks.

   Site A		Site B
   Cable this site A bridge...	To this port on FC_switch_A_2...	Cable this Site B bridge...	To this port on FC_switch_B_2...
   bridge_A_2_38	38	bridge_B_2_38	38
   bridge_A_2_39	39	bridge_B_2_39	39
   bridge_A_2_40	40	bridge_B_2_40	40
   bridge_A_2_41	41	bridge_B_2_41	41
   bridge_A_2_42	42	bridge_B_2_42	42
   bridge_A_2_43	43	bridge_B_2_43	43
   bridge_A_2_44	44	bridge_B_2_44	44
   bridge_A_2_45	45	bridge_B_2_45	45