Table of ContentsView in Frames

How you run a manual RAID-level scrub

You can manually run a RAID-level scrub on individual RAID groups, plexes, aggregates, or all aggregates using the storage aggregate scrub command. You can also stop, suspend, and resume manual RAID-level scrubs.

If you try to run a RAID-level scrub on a RAID group that is not in a normal state (for example, a group that is reconstructing or degraded), the scrub returns errors and does not check that RAID group. You can run a RAID-level scrub on a RAID-DP group with one failed disk.