Table of ContentsView in Frames

Storage Virtual Machine details page

You can use the Storage Virtual Machine details page to view detailed information about the selected Storage Virtual Machine (SVM, formerly known as Vserver) that is monitored by Unified Manager, such as its health, capacity, configuration, data policies, logical interfaces (LIFs), LUNs, qtrees, and user and user group quotas. You can also view information about the related objects and related alerts for the SVM.

Note: You can monitor only data SVMs.

Command buttons

The command buttons enable you to perform the following tasks for the selected SVM:
Actions
  • Add Alert

    Enables you to add an alert to the selected SVM.

  • Edit Thresholds

    Enables you to edit the SVM thresholds.

    Note: This button is enabled only for SVM with Infinite Volume.
View Storage Virtual Machines
Enables you to navigate to the Storage Virtual Machines page.

Health tab

The Health tab displays detailed information about data availability, data capacity, and protection issues of various objects such as volumes, aggregates, NAS LIFs, SAN LIFs, LUNs, protocols, services, NFS exports, and CIFS shares. Availability issues are related to the data-serving capability of the SVM objects. Capacity issues are related to the data-storing capability of the SVM objects. Protection issues are related to the data protection capability of the SVM objects.

You can click the graph of an object to view the filtered list of objects. For example, you can click the volume capacity graph that displays warnings to view the list of volumes that have capacity issues with severity as warning.

Availability
Displays, as a graph, the total number of objects, including objects that have availability issues and objects that do not have any availability-related issues. The colors in the graph represent the different severity levels of the issues. The information below the graph provides details about availability issues that can impact or have already impacted the availability of data in the SVM. For example, information is displayed about the NAS LIFs and the SAN LIFs that are down and volumes that are offline.

You can also view information about the related protocols and services that are currently running, and the number and status of NFS exports and CIFS shares.

If the selected SVM is an SVM with Infinite Volume, you can view availability details about the Infinite Volume.

Capacity
Displays, as a graph, the total number of objects, including objects that have capacity issues and objects that do not have any capacity-related issues. The colors in the graph represent the different severity levels of the issues. The information below the graph provides details about capacity issues that can impact or have already impacted the capacity of data in the SVM. For example, information is displayed about aggregates that are likely to breach the set threshold values.

If the selected SVM is an SVM with Infinite Volume, you can view capacity details about the Infinite Volume.

Protection
Provides a quick overview of SVM protection-related health by displaying, as a graph, the total number of relationships, including relationships that have protection issues and relationships that do not have any protection-related issues. When unprotected volumes exist, clicking on the link takes you to the Volumes page where you can view a filtered list of the unprotected volumes on the SVM. The colors in the graph represent the different severity levels of the issues. Clicking a graph takes you to the Volume Protection Relationships page, where you can view a filtered list of protection relationship details. The information below the graph provides details about protection issues that can impact or have already impacted the protection of data in the SVM. For example, information is displayed about volumes that have a Snapshot copy reserve that is almost full or about SnapMirror relationship lag issues.

If the selected SVM is a repository SVM, the Protection area does not display.

Capacity tab

The Capacity tab displays detailed information about the data capacity of the selected SVM.

The following information is displayed for an SVM with FlexVol volume:
Capacity
The Capacity area displays details about the used and available capacity allocated from all volumes:
  • Total Capacity

    Displays the total capacity (in MB, GB, and so on) of the SVM.

  • Used

    Displays the space used by data in the volumes that belong to the SVM.

  • Guaranteed Available

    Displays the guaranteed available space for data that is available for volumes in the SVM.

  • Unguaranteed

    Displays the available space remaining for data that is allocated for thinly provisioned volumes in the SVM.

Volumes with Capacity Issues
The Volumes with Capacity Issues list displays, in tabular format, details about the volumes that have capacity issues:
  • Status

    Indicates that the volume has a capacity-related issue of a certain severity.

    You can move the pointer over the status to view more information about the capacity-related event or events generated for the volume.

    If the status of the volume is determined by a single event, you can view information such as the event name, time and date when the event was triggered, the name of the administrator to whom the event is assigned, and the cause of the event. You can use the View Details button to view more information about the event.

    If the status of the volume is determined by multiple events of the same severity, the top three events are displayed with information such as the event name, time and date when the events were triggered, and the name of the administrator to whom the event is assigned. You can view more details about each of these events by clicking the event name. You can also click the View All Events link to view the list of generated events.

    Note: A volume can have multiple events of the same severity or different severities. However, only the highest severity is displayed. For example, if a volume has two events with severities of Error and Warning, only the Error severity is displayed.
  • Volume

    Displays the name of the volume.

  • Used Data Capacity

    Displays, as a graph, information about the volume capacity usage (in percentage).

  • Days to Full

    Displays the estimated number of days remaining before the volume reaches full capacity.

  • Thin Provisioned

    Displays whether space guarantee is set for the selected volume. Valid values are Yes and No.

  • Aggregate

    Displays the name of the aggregate that contains the volume.

The following information is displayed for an SVM with Infinite volume:
Capacity
Displays the following capacity-related details:
  • Percentage of used and free data capacity
  • Percentage of used and free Snapshot capacity
  • Snapshot Overflow

    Displays the data space that is consumed by the Snapshot copies.

  • Used

    Displays the space used by data in the SVM with Infinite Volume.

  • Warning

    Indicates that the space in the SVM with Infinite Volume is nearly full. If this threshold is breached, the Space Nearly Full event is generated.

  • Error

    Indicates that the space in the SVM with Infinite Volume if full. If this threshold is breached, the Space Full event is generated.

Other Details
  • Total Capacity

    Displays the total capacity in the SVM with Infinite Volume.

  • Data Capacity

    Displays used data capacity, available data capacity, and Snapshot overflow capacity details of the SVM with Infinite Volume.

  • Snapshot Reserve

    Displays the used and free details of the Snapshot reserve.

  • System Capacity

    Displays the used system capacity and available system capacity in the SVM with Infinite Volume.

  • Thresholds

    Displays the nearly full and full thresholds of the SVM with Infinite Volume.

Storage Class Capacity Details
Displays information about the capacity usage in your storage classes. This information is displayed only if you have configured storage classes for your SVM with Infinite Volume.
Storage Virtual Machine Storage Class Thresholds
Displays the following thresholds (in percentage) of your storage classes:
  • Nearly Full Threshold

    Specifies the percentage at which a storage class in an SVM with Infinite Volume is considered to be nearly full.

  • Full Threshold

    Specifies the percentage at which the storage class in an SVM with Infinite Volume is considered full.

  • Snapshot Usage Limit

    Specifies the limit, in percentage, on the space reserved for Snapshot copies in the storage class.

Configuration tab

The Configuration tab displays configuration details about the selected SVM, such as its cluster, root volume, the type of volumes it contains (Infinite Volume or FlexVol volumes), and the policies created on the SVM:

Overview
  • Cluster

    Displays the name of the cluster to which the SVM belongs.

  • Allowed Volume Type

    Displays the type of volumes that can be created in the SVM. The type can be InfiniteVol or FlexVol.

  • Root Volume

    Displays the name of the root volume of the SVM.

  • Allowed Protocols

    Displays the type of protocols that can be configured on the SVM. Also, indicates if a protocol is up (Icon for LIF availability – Up), down (Icon for LIF availability – Down), or is not configured (Icon for LIF availability – Unknown).

Data LIFs
  • NAS

    Displays the number of NAS LIFs that are associated with the SVM. Also, indicates if the LIFs are up (Icon for LIF availability – Up) or down (Icon for LIF availability – Down).

  • SAN

    Displays the number of SAN LIFs that are associated with the SVM. Also, indicates if the LIFs are up (Icon for LIF availability – Up) or down (Icon for LIF availability – Down).

  • Junction Path

    Displays the path on which the Infinite Volume is mounted. Junction path is displayed for an SVM with Infinite Volume only.

  • Storage Classes

    Displays the storage classes associated with the selected SVM with Infinite Volume. Storage classes are displayed for an SVM with Infinite Volume only.

Management LIFs
  • Availability

    Displays the number of management LIFs that are associated with the SVM. Also, indicates if the management LIFs are up (Icon for LIF availability – Up) or down (Icon for LIF availability – Down).

Policies
  • Snapshots

    Displays the name of the Snapshot policy that is created on the SVM.

  • Export Policies

    Displays either the name of the export policy if a single policy is created or displays the number of export policies if multiple policies are created.

  • Data Policy

    Displays whether a data policy is configured for the selected SVM with Infinite Volume.

Services
  • Type

    Displays the type of service that is configured on the SVM. The type can be Domain Name System (DNS) or Network Information Service (NIS).

  • State

    Displays the state of the service, which can be Up (Icon for LIF availability – Up), Down (Icon for LIF availability – Down), or Not Configured (Icon for LIF availability – Unknown).

  • Domain Name

    Displays the fully qualified domain names (FQDNs) of the DNS server for the DNS services or NIS server for the NIS services. When the NIS server is enabled, the active FQDN of the NIS server is displayed. When the NIS server is disabled, the list of all the FQDNs are displayed.

  • IP Address

    Displays the IP addresses of the DNS or NIS server. When the NIS server is enabled, the active IP address of the NIS server is displayed. When the NIS server is disabled, the list of all the IP addresses are displayed.

LIFs tab

The LIFs tab displays details about the data LIFs that are created on the selected SVM:

LIF
Displays the name of the LIF that is created on the selected SVM.
Operational Status
Displays the operational status of the LIF, which can be Up (Icon for LIF status – Up), Down (Icon for LIF status – Down), or Unknown (Icon for HA state – unknown). The operational status of a LIF is determined by the status of its physical ports.
Administrative Status
Displays the administrative status of the LIF, which can be Up (Icon for LIF status – Up), Down (Icon for LIF status – Down), or Unknown (Icon for HA state – unknown). The administrative status of a LIF is controlled by the storage administrator to make changes to the configuration or for maintenance purposes. The administrative status can be different from the operational status. However, if the administrative status of a LIF is Down, the operational status is Down by default.
IP Address / WWPN
Displays the IP address for Ethernet LIFs and the World Wide Port Name (WWPN) for FC LIFs.
Protocols
Displays the list of data protocols that are specified for the LIF, such as CIFS, NFS, iSCSI, FC/FCoE, and FlexCache. For Infinite Volume, the SAN protocols are not applicable.
Role
Displays the LIF role. The roles can be Data or Management.
Home Port
Displays the physical port to which the LIF was originally associated.
Port Set
Displays the port set to which the LIF is mapped.
Current Port
Displays the physical port to which the LIF is currently associated. If the LIF is migrated, the current port might be different from the home port.
Failover Policy
Displays the failover policy that is configured for the LIF. For NFS, CIFS, and FlexCache LIFs, the default failover policy is Next Available. Failover policy is not applicable for FC and iSCSI LIFs.
Routing Groups
Displays the name of the routing group. You can view more information about the routes and the destination gateway by clicking the routing group name.

Routing groups are not supported for clustered Data ONTAP 8.3 or later and therefore a blank column is displayed for these clusters.

Failover Group
Displays the name of the failover group.

Qtrees tab

The Qtrees tab displays details about qtrees and their quotas.

Note: The Qtrees tab is not displayed for an SVM with Infinite Volume.
Status
Displays the current status of the qtree. The status can be Critical (Icon for event severity – critical), Error (Icon for event severity – error), Warning (Icon for event severity – warning), or Normal (Icon for event severity – normal).

You can move the pointer over the status icon to view more information about the event or events generated for the qtree.

If the status of the qtree is determined by a single event, you can view information such as the event name, time and date when the event was triggered, the name of the administrator to whom the event is assigned, and the cause of the event. You can use View Details to view more information about the event.

If the status of the qtree is determined by multiple events of the same severity, the top three events are displayed with information such as the event name, time and date when the events were triggered, and the name of the administrator to whom the event is assigned. You can view more details about each of these events by clicking the event name. You can also use View All Events to view the list of generated events.

Note: A qtree can have multiple events of the same severity or different severities. However, only the highest severity is displayed. For example, if a qtree has two events with severities of Error and Warning, only the Error severity is displayed.
Qtree
Displays the name of the qtree.
Volume
Displays the name of the volume that contains the qtree.

You can move the pointer over the volume name to view more information about the volume.

Quota Set
Indicates whether a quota is enabled or disabled on the qtree.
Disk Used %
Displays the percentage of disk space used. If a disk hard limit is set, this value is based on the disk hard limit. If the quota is set without a disk hard limit, the value is based on the volume data space. If the quota is not set or if quotas are off on the volume to which the qtree belongs, then "Not applicable" is displayed.
Disk Hard Limit
Displays the maximum amount of disk space allocated for the qtree. Unified Manager generates a critical event when this limit is reached and no further disk writes are allowed. The value is displayed as "Unlimited" for the following conditions: if the quota is set without a disk hard limit, if the quota is not set, or if quotas are off on the volume to which the qtree belongs.
Disk Soft Limit
Displays the amount of disk space allocated for the qtree before a warning event is generated. The value is displayed as "Unlimited" for the following conditions: if the quota is set without a disk soft limit, if the quota is not set, or if quotas are off on the volume to which the qtree belongs. By default, this column is hidden.
Disk Threshold
Displays the threshold value set on the disk space. The value is displayed as "Unlimited" for the following conditions: if the quota is set without a disk threshold limit, if the quota is not set, or if quotas are off on the volume to which the qtree belongs. By default, this column is hidden.
Files Used %
Displays the percentage of files used in the qtree. If the file hard limit is set, this value is based on the file hard limit. No value is displayed if the quota is set without a file hard limit. The value is displayed as "Not applicable" if the quota is not set or if quotas are off on the volume to which qtree belongs.
File Hard Limit
Displays the hard limit for the number of files permitted on the qtrees. The value is displayed as "Unlimited" for the following conditions: if the quota is set without a file hard limit, if the quota is not set, or if quotas are off on the volume to which the qtree belongs.
File Soft Limit
Displays the soft limit for the number of files permitted on the qtrees. The value is displayed as "Unlimited" for the following conditions: if the quota is set without a file soft limit, if the quota is not set, or if quotas are off on the volume to which the qtree belongs. By default, this column is hidden.

User and Group Quotas tab

Displays details about the user and user group quotas for the selected SVM. You can view information such as the status of the quota, name of the user or user group, soft and hard limits set on the disks and files, amount of disk space and number of files used, and the disk threshold value. You can also change the email address associated with a user or user group.

Edit Email Address
Opens the Edit Email Address dialog box, which displays the current email address of the selected user or user group. You can modify the email address. If the Edit Email Address field is blank, the default rule is used to generate an email address for the selected user or user group.

If more than one user has the same quota, the names of the users are displayed as comma-separated values. Also, the default rule is not used to generate the email address; therefore, you must provide the required email address for notifications to be sent.

Configure Email Rules

Enables you to create or modify rules to generate an email address for the user or user group quotas that are configured on the SVM. A notification is sent to the specified email address when there is a quota breach.

Status
Displays the current status of the quota. The status can be Critical (Icon for event severity – critical), Warning (Icon for event severity – warning), or Normal (Icon for event severity – normal).

You can move the pointer over the status icon to view more information about the event or events generated for the quota.

If the status of the quota is determined by a single event, you can view information such as the event name, time and date when the event was triggered, the name of the administrator to whom the event is assigned, and the cause of the event. You can use View Details to view more information about the event.

If the status of the quota is determined by multiple events of the same severity, the top three events are displayed with information such as the event name, time and date when the events were triggered, and the name of the administrator to whom the event is assigned. You can view more details about each of these events by clicking the event name. You can also use View All Events to view the list of generated events.

Note: A quota can have multiple events of the same severity or different severities. However, only the highest severity is displayed. For example, if a quota has two events with severities of Error and Warning, only the Error severity is displayed.
User or Group
Displays the name of the user or user group. If more than one user has the same quota, the names of the users are displayed as comma-separated values.

The value is displayed as "Unknown" when Data ONTAP does not provide a valid user name because of SecD errors.

Type
Specifies if the quota is for a user or a user group.
Volume or Qtree
Displays the name of the volume or qtree on which the user or user group quota is specified.

You can move the pointer over the name of the volume or qtree to view more information about the volume or qtree.

Disk Used %
Displays the percentage of disk space used. The value is displayed as "Not applicable" if the quota is set without a disk hard limit.
Disk Soft Limit

Displays the amount of disk space allocated for the quota before a warning event is generated. The value is displayed as "Unlimited" if the quota is set without a disk soft limit. By default, this column is hidden.

Disk Hard Limit

Displays the maximum amount of disk space allocated for the quota. Unified Manager generates a critical event when this limit is reached and no further disk writes are allowed. The value is displayed as "Unlimited" if the quota is set without a disk hard limit.

Disk Threshold
Displays the threshold value set on the disk space. The value is displayed as "Unlimited" if the quota is set without a disk threshold limit. By default, this column is hidden.
Files Used %
Displays the percentage of files used in the qtree. The value is displayed as "Not applicable" if the quota is set without a file hard limit.
File Hard Limit

Displays the hard limit for the number of files permitted on the quota. The value is displayed as "Unlimited" if the quota is set without a file hard limit.

File Soft Limit
Displays the soft limit for the number of files permitted on the quota. The value is displayed as "Unlimited" if the quota is set without a file soft limit. By default, this column is hidden.
Email Address
Displays the email address of the user or user group to which notifications are sent when there is a breach in the quotas.

NFS Exports tab

The NFS Exports tab displays information about the NFS exports such as its status, the path associated with the volume (Infinite Volumes or FlexVol volumes), access levels of clients to the NFS exports, and the export policy defined for the volumes that are exported. NFS Export will not be displayed for the following conditions: if the volume is not mounted or if the protocols associated with the export policy for the volume do not contain NFS.

Status
Displays the current status of the NFS export. The status can be Error (Icon for event severity – error) or Normal (Icon for event severity – normal).
Junction Path
Displays the path to which the volume is mounted.
Junction Path Active
Displays whether the path to access the mounted volume is active or inactive.
Volume / Storage Virtual Machine
Displays the name of the volume, if the volume being exported is a FlexVol volume. For Infinite Volumes, the name of the SVM containing the Infinite Volume is displayed.
Volume State
Displays the state of the volume that is being exported. The state can be Offline, Online, or Restricted.
  • Offline

    Read or write access to the volume is not allowed.

  • Online

    Read and write access to the volume is allowed.

  • Restricted

    Limited operations, such as parity reconstruction, are allowed, but data access is not allowed.

Security Style
Displays the access permission for the volumes that are exported. The security style can be UNIX, Unified, NTFS, or Mixed.
  • UNIX (NFS clients)

    Files and directories in the volume have UNIX permissions.

  • Unified

    Files and directories in the volume have a unified security style.

  • NTFS (CIFS clients)

    Files and directories in the volume have Windows NTFS permissions.

  • Mixed

    Files and directories in the volume can have either UNIX permissions or Windows NTFS permissions.

UNIX Permission
Displays the UNIX permission bits in an octal string format, which is set for the volumes that are exported. It is similar to the UNIX style permission bits.
Export Policy
Displays the rules that define the access permission for volumes that are exported. You can click the link to view details about the rules associated with the export policy such as the authentication protocols and the access permission.

CIFS Shares tab

Displays information about the CIFS shares on the selected SVM. You can view information such as the status of the CIFS share, share name, path associated with the SVM, the status of the junction path of the share, containing object, state of the containing volume, security data of the share, and export policies defined for the share. You can also determine whether an equivalent NFS path for the CIFS share exists.

View User Mapping
Launches the User Mapping dialog box.

You can view the details of user mapping for the SVM.

Show ACL
Launches the Access Control dialog box for the share.

You can view user and permission details for the selected share.

Status
Displays the current status of the share. The status can be Normal (Icon for event severity – normal) or Error (Icon for event severity – error).
Share Name
Displays the name of the CIFS share.
Path
Displays the junction path on which the share is created.
Junction Path Active
Displays whether the path to access the share is active or inactive.
Containing Object
Displays the name of the containing object to which the share belongs. The containing object can be a volume or a qtree.

By clicking the link, you can view details about the containing object in the respective Details page. If the containing object is a qtree, links are displayed for both qtree and volume.

Volume State
Displays the state of the volume that is being exported. The state can be Offline, Online, or Restricted.
  • Offline

    Read or write access to the volume is not allowed.

  • Online

    Read and write access to the volume is allowed.

  • Restricted

    Limited operations, such as parity reconstruction, are allowed, but data access is not allowed.

Security
Displays the access permission for the volumes that are exported. The security style can be UNIX, Unified, NTFS, or Mixed.
  • UNIX (NFS clients)

    Files and directories in the volume have UNIX permissions.

  • NTFS (CIFS clients)

    Files and directories in the volume have Windows NTFS permissions.

  • Mixed

    Files and directories in the volume can have either UNIX permissions or Windows NTFS permissions.

Export Policy
Displays the name of the export policy applicable on the share. If an export policy is not specified for the SVM, the value is displayed as Not Enabled.

You can click the link to view details about the rules associated with the export policy, such as access protocols and permissions. The link is disabled if the export policy is disabled for the selected SVM.

NFS Equivalent
Specifies whether there is an NFS equivalent for the share.

SAN tab

Displays details about LUNs, initiator groups, and initiators for the selected SVM. By default, the LUNs view is displayed. You can view details about the initiator groups in the Initiator Groups tab and details about initiators in the Initiators tab.

LUNs
Displays details about the LUNs that belong to the selected SVM. You can view information such as the LUN name, LUN state (online or offline), the name of the file system (volume or qtree) that contains the LUN, the type of host operating system, the total data capacity and serial number of the LUN. You can also view information whether thin provisioning is enabled on the LUN and if the LUN is mapped to an initiator group.

You can also view the initiator groups and initiators that are mapped to the selected LUN.

Initiator Groups
Displays details about initiator groups. You can view details such as the name of the initiator group, the access paths to which the initiator group is connected (one, many, or no paths), the type of host operating system used by all of the initiators in the group, and the supported protocol. You can view if initiator groups are mapped to all the LIFs or specific LIFs through a port set. When you click the count link in the Mapped LIFs column, the LIFs that are mapped through the target portal are not displayed. The total number of initiators and LUNs that are mapped to an initiator group is displayed.

You can also view the LUNs and initiators that are mapped to the selected initiator group.

Initiators
Displays the name and type of the initiator and the total number of initiator groups mapped to this initiator for the selected SVM.

You can also view the LUNs and initiator groups that are mapped to the selected initiator group.

Data Policy tab

The Data Policy tab enables you to create, modify, activate, or delete one or more rules in a data policy. You can also import the data policy into the Unified Manager database and export the data policy to your computer:

Note: The Data Policy tab is displayed only for SVMs with Infinite Volume.
Rules list
Displays the list of rules. By expanding the rule, you can view the corresponding matching criteria of the rule and the storage class where the content is placed based on the rule.

The default rule is the last rule in the list. You cannot change the order of the default rule.

  • Matching Criteria
    Displays the conditions for the rule. For example, a rule can be "File path starts with /eng/nightly".
    Note: The file path must always start with a junction path.
  • Content Placement

    Displays the corresponding storage class for the rule.

Rule Filter
Enables you to filter rules associated with a specific storage class listed in the list.
Action buttons
  • Create

    Opens the Create Rule dialog box, which enables you to create a new rule for your data policy.

  • Edit

    Opens the Edit Rule dialog box, which enables you to modify rule properties such as directory paths, file types, and owners.

  • Delete

    Deletes the selected rule.

  • Move Up

    Moves the selected rule up in the list. However, you cannot move the default rule up in the list.

  • Move Down

    Moves the selected rule down the list. However, you cannot move the default rule down the list.

  • Activate

    Activates the rules and changes made to the data policy in the SVM with Infinite Volume.

  • Reset

    Resets all changes made to the data policy configuration.

  • Import

    Imports a data policy configuration from a file.

  • Export

    Exports a data policy configuration to a file.

Related Devices area

The Related Devices area enables you to view and navigate to the LUNs, CIFS shares, and the user and user group quotas that are related to the qtree:

LUNs
Displays the total number of the LUNs associated with the selected qtree.
CIFS Shares
Displays the total number of CIFS shares associated with the selected qtree.
User and Group Quotas
Displays the total number of the user and user group quotas associated with the selected qtree. The health status of the user and user group quotas is also displayed, based on the highest severity level.

Related Annotations pane

The Related Annotations pane enables you to view the annotation details associated with the selected SVM. Details include the annotation name and the annotation values that are applied to the SVM.

Related Devices pane

The Related Devices pane enables you to view the cluster, aggregates, and volumes that are related to the SVM:
Cluster
Displays the health status of the cluster to which the SVM belongs.
Aggregates
Displays the number of aggregates that belong to the selected SVM. The health status of the aggregates is also displayed, based on the highest severity level. For example, if an SVM contains ten aggregates, five of which display the Warning status and the remaining five display the Critical status, then the status displayed is Critical.
Assigned Aggregates
Displays the number of aggregates that are assigned to an SVM. The health status of the aggregates is also displayed, based on the highest severity level.
Volumes
Displays the number and capacity of the volumes that belong to the selected SVM. The health status of the volumes is also displayed, based on the highest severity level.

Related Alerts pane

The Related Alerts pane enables you to view the list of alerts that are created for the selected SVM. You can also add an alert by clicking the Add Alert link or edit an existing alert by clicking the alert name.