The Aggregate Capacity and Utilization report enables you to view information about the capacity and utilization of aggregates in a cluster. This information enables you to understand possible capacity risks and also to view the configured, used, and
unused capacity of aggregates.
Aggregate Capacity and Utilization report tabular view
- Cluster
- Displays the cluster name.
- HA Pair
- Displays the HA pair value obtained by forming two nodes.
- Aggregate
- Displays the aggregate name.
- Total Data Capacity (GB)
- Displays the total data capacity (used plus available).
- Used Data Capacity (GB)
- Displays the used data capacity.
- Used Data %
- Displays the used data capacity as a percentage.
- Available Data Capacity (GB)
- Displays the available data capacity.
- Available Data %
- Displays the available data capacity as a percentage.
- Used Capacity Trend
- Displays a chart of used data capacity of the aggregate over a period of time.
- Daily Growth Rate
%
- Displays the growth rate that occurs every 24 hours in the volume.
- Days To Full
- Displays the estimated number of days remaining before the aggregate reaches full capacity.
- Space Full Threshold
- Displays the percentage at which an aggregate is full.
- Space Nearly Full Threshold
- Displays the percentage at which an aggregate is nearly full.
- Growth Rate Threshold
Specifies the aggregate's growth rate is considered to be normal before the system generates an Aggregate Growth Rate Abnormal event.
- Growth Rate Sensitivity Threshold
- Specifies the factor that is applied to the standard deviation of a volume's growth rate. If the growth rate exceeds the factored standard deviation, a Volume Growth Rate Abnormal event is generated.
- Days Until Full Threshold
Specifies the number of days remaining before the aggregate reaches full capacity.
- Snapshot Reserve Total Capacity (GB)
- Displays the total snapshot reserve capacity of the aggregate.
- Snapshot Reserve Used Capacity (GB)
- Displays the amount of space used by snapshot copies from snapshot reserve.
- Snapshot Reserve Used %
- Displays the amount of space used by Snapshot copies from snapshot reserve as a percentage.
- Snapshot Reserve Available Capacity (GB)
- Displays the amount of space available for Snapshot copies.
- Snapshot Reserve Available %
- Displays the amount of space available for Snapshot copies as a percentage.
- Snapshot Copies Reserve Full Threshold
Specifies the percentage at which an aggregate has consumed all its space reserved for Snapshot copies.
- Overcommitted Capacity %
- Displays the aggregate overcommitment as a percentage.
- Overcommitted Threshold %
- Displays the percentage at which an aggregate is overcommitted.
- Nearly Overcommitted Threshold %
- Displays the percentage at which an aggregate is nearly overcommitted.
- Type
- Indicates whether the aggregate is a Flash Pool aggregate (combines HDDs and SSDs), or whether the disks in the aggregate are standard disks (HDDs only) or SSD disks (SSDs only).
For standard disks and SSD disks, this column is blank when the monitored storage
system is running clustered Data ONTAP
version earlier than 8.3.
- RAID Type
- Displays the RAID configuration type.
- Aggregate State
- Displays the current state of the aggregate.